Rengin guner jewellery

Free delivery in Australia and in New Zealand



Option 1... Visit your local jeweller

The safest bet is going into a local jeweller and having your size taken, mention the type of band you will be purchasing... thin, wide etc. for the most accurate results.

​Option 2... Working out your size from an existing ring

Take an existing ring that fits nicely and measure to the point of the millimetre the inside diameter of the ring. The diameter is the line that passes from one side of a circle through the centre to the other side. Be sure to measure the INSIDE diameter of the ring (do not include the ring band in your measurement.

Option 3... Measure the circumference of your finger

Cut a strip of paper to the approximate width of the ring you wish to purchase. Wrap the paper around your finger, making sure to measure the widest part of your finger below the joint and above the knuckle. Mark the spot where the paper meets and measure the distance to the point of the millimetre with a ruler.

BANGLES...Option 1 and 2 are the same as above.

Visit your local jeweller for an accurate measurement or measure the inside diameter of an existing bangle.


SML 60mm     MED 64mm     LRG 67mm   XL 70mm

Option 3.... Measure the widest part of your hand

Bring your thumb and little finger together (like you were trying on a bangle) and measure with a measuring tape or a piece of string the widest part of your hand, usually close around the knuckles.


SML 190mm

MED 200mm

LRG 210mm

XL 220mm